General Specifications
| Flow Rates |
<1to121 GPH (<4to458LPH) |
Metal
Wetted Parts |
316 Stainless Steel, Titanium, or Hastelloy C276 |
| Temperatures |
-50 to 350°F (-46 to 176°() |
Ports |
1/8-27NPTor 1 /4 -18NPT |
Differential
Pressures |
250 PSI (17.2 bar) |
Speed |
5,000 RPM maximum |
| System Pressures |
500 PSI (34.5 bar) |
Service Life |
Up to 20,000 hours+ based on water |
| Viscosity |
0.3 to 2000 cps+ |
Suction
Vacuum |
28.5 " Hg (724 mm Hg) |
| Magnet Torque |
15 to 240 in-oz |
Self Priming |
Yes, wetted |
| Magnet Materials |
Ceramic or Samarium Cobalt |
Size |
1.6" diameter pumphead |
Flow @ 3500 RPM
| Model ml/rev |
GPH
@ 0 PSI |
LPH
@ 0 bar |
GPH @ PSI Differential Pressure |
LPH @ bar Differential Pressure |
Con PSI |
Con bar |
Int PSI |
Int bar |
| 0.11 |
6 |
22 |
.2 @ 150 |
.75 @ 10.3 |
250 |
17.2 |
250 |
17.2 |
| 0.19 |
10 |
38 |
.7 @ 250 |
2.6 @ 17.2 |
250 |
17.2 |
250 |
17.2 |
| 0.23 |
12 |
46 |
2 @ 250 |
7 @ 17.2 |
250 |
17.2 |
250 |
17.2 |
| 0.38 |
20 |
76 |
5 @ 250 |
19 @ 17.2 |
250 |
17.2 |
250 |
17.2 |
| 0.57 |
30 |
114 |
9 @ 250 |
34 @ 17.2 |
250 |
17.2 |
250 |
17.2 |
| 0.68 |
36 |
136 |
17 @ 250 |
64 @ 13.8 |
200 |
13.8 |
250 |
17.2 |
| 0.80 |
42 |
160 |
21 @ 200 |
79 @ 13.8 |
200 |
13.8 |
250 |
17.2 |
| 0.99 |
52 |
198 |
36 @ 140 |
136 @ 9.7 |
140 |
9.7 |
200 |
13.8 |
| 1.2 |
63 |
239 |
45 @140 |
170 @ 9.7 |
140 |
9.7 |
200 |
13.8 |
| 1.3 |
69 |
259 |
51 @125 |
193 @ 8.6 |
125 |
8.6 |
175 |
12.1 |
| 1.6 |
84 |
319 |
68 @ 100 |
257 @ 6.9 |
100 |
6.9 |
150 |
10.3 |
| 2.0 |
105 |
399 |
86 @ 100 |
325 @ 6.9 |
100 |
6.9 |
150 |
10.3 |
| 2.3 |
121 |
459 |
96 @ 100 |
363 @ 6.9 |
100 |
6.9 |
150 |
10.3 |
Materials of Construction
| Metal Wetted Parts |
316 Stainless Steel, Hastelloy C276, or Titanium |
| Gears & Bearings |
PPS (Polyphenylene Sulfide), PEEK (Polyetheretherketone), or PTFE |
| O-Rings |
Viton or PTFE |
| Ports |
1/8 NPT or 1/4 NPT |
| Magnet Shrouds |
Ceramic Magnets (stronium ferrite) may be O-Ring seal shrouded; Samarium Cobalt Magnets are
Metal Laser Welded |
| Magnet Torque |
15 in/oz, 30 in/oz, 50 in/oz or 240 in/oz |
| Bypass |
Full flow externally adjustable bypass option available |
| Suction Vacuum |
Pumps self prime when wetted with operating fluid to 28.5 Hg” (724mm Hg). Dry lift not recommended. Fluid viscosity, temperature and pressure may affect the performance. |
| Motors |
AC, DC, BLDC, Air, Variable Speed or Motor Mate Adapter Kits |
| Operating Temperatures above 140 °F (60 °C) |
In the D Series Product line we offer special sizing option for operating at temperatures above 140 °F (60 °C). Consult factory for details. |
Gear & Bearing Material
Temperature Limit |
PPS limit is approximately 250 °F (121 °C) PEEK, Carbon and Metal limits are approximately 350 °F (176 °C) If possible, for temperatures above 250 °F (121 °C) Carbon bearings should be selected. |
